If you’re searching for this because a storm just hit your roof, here’s the short version: the best roofing company for insurance claims near you in Atlanta is the one whose estimators write your claim scope in the same software your carrier uses to price it. Integrity CRR is a service-disabled veteran-owned general contractor at 4720 Chamblee Dunwoody Rd, Suite 200, Atlanta, GA 30338, holding Georgia GC license #GCCO009212 and Florida license #CGC1539499, and its in-house team is Haag-certified and Xactimate-certified at the highest reviewer level.
What Makes a Roofing Company Good at Insurance Claims in Atlanta
Most roofing companies that handle insurance work write their estimate in their own format, then argue with the adjuster’s Xactimate estimate in general terms — “we think this is low” without being able to show exactly why. Xactimate is the estimating platform nearly every property insurance carrier in Georgia uses to price a claim, and it’s what the adjuster’s number comes out of. Integrity CRR’s highest-level Haag Certified Reviewer writes the repair scope in Xactimate itself, so the two estimates can sit side by side, line item against line item, and any gap is visible instead of argued about. Integrity also holds the GC license to build the job, which means the same company that wrote the estimate does the repair — nobody is handing your file to a separate outside estimator or a different contractor once the claim is approved.
How Integrity CRR Handles an Atlanta Roof Claim
Inspection
A Haag-certified roof inspector documents the damage on-site — photos of every slope, every penetration, and every area of impact damage, not just a summary. Haag certification is a recognized third-party credential for identifying storm damage (hail, wind, impact) versus normal wear, which matters because carriers push back hardest on damage they can argue is age-related.
Documentation
The inspection findings get built into a written damage report with photos tied to specific roof areas. This is the file that goes to the carrier, not a verbal description of what was found.
Adjuster Meeting
Integrity CRR meets the insurance adjuster on the roof when the claim is inspected. Having the same person who wrote the damage report standing next to the adjuster, pointing at the same shingle, resolves disagreements faster than a phone call after the fact.
Scope of Repair
The repair scope is written in Xactimate, itemized by trade and material, and compared directly against whatever the carrier’s adjuster produced. Line items the adjuster missed — code-required upgrades, detached structures like a shed or fence hit in the same storm, decking or flashing that only shows damage once the roof is opened — get flagged specifically, not described generally.
Supplementing
If the approved estimate is short once the scope is written, Integrity CRR documents the gap and submits a supplement to the carrier. That’s standard contractor practice, not negotiation on the homeowner’s behalf — Integrity CRR is not a public adjuster and doesn’t represent you to the carrier. What the policy actually covers is a decision between you and your insurance company. What Integrity CRR controls is making sure every item of justified, claimable damage is in the scope it writes.
The Guarantee
Once your claim is approved, Integrity CRR guarantees you get the full value of it. That’s a guarantee about the completeness of the scope Integrity CRR writes — every item of justified damage gets documented and priced, including the things carriers routinely leave off a first estimate. It is not a guarantee that a claim will be approved, that a denial will be overturned, or of any dollar amount, because coverage decisions belong to the carrier, not the contractor.
Credentials That Actually Matter on a Roof Claim
| Credential | What it means for your claim |
|---|---|
| Haag-certified roof inspector | Third-party trained to distinguish storm damage from wear, which is where most disputes happen |
| Highest-level Haag Certified Reviewer, Xactimate certified | Writes the scope in the carrier’s own pricing software, line by line |
| GAF and Mule-Hide certified | Manufacturer-backed installation standards on the materials actually used |
| GA GC #GCCO009212 / FL CGC1539499 | Licensed to perform the repair, not just estimate it |
| SDVOSB, SAM.gov registered, bonded | Verified small-business status for public and private work |
Roofing is one trade where Integrity CRR self-performs the work with its own crews rather than subcontracting it out. On other trades — commercial build-outs, tenant improvements, and public works — Integrity CRR acts as general contractor managing vetted subcontractors, but the roof crew and the roof estimate both stay in-house.
What a Roof Replacement Costs in Metro Atlanta
These are general market ranges for the metro Atlanta and Southeast region, not a quote — every roof needs a physical inspection and a written estimate before a real number exists.
- Asphalt shingle replacement: roughly $400–$650 per square (100 sq ft), depending on pitch, layers to tear off, and decking condition
- Commercial single-ply (TPO/EPDM): roughly $6–$12 per square foot, depending on insulation, drainage, and roof access
- Storm-related repairs (flashing, decking, isolated sections): typically a few thousand dollars up to the cost of a full replacement, depending on how far the damage spreads once the roof is opened
Steep pitch, multiple layers of old roofing, hidden decking rot, and difficult access all push a job toward the top of these ranges. A straightforward single-story roof with sound decking lands toward the bottom.
Service Area
Integrity CRR works roof insurance claims across metro Atlanta, including Sandy Springs, Dunwoody, Roswell, Alpharetta, and Marietta, plus the rest of Georgia and Florida under its GC licenses. See the full locations list or current and past projects for more on the work.
Get an Inspection Started
If a storm hit your roof in the last year, get a Haag-certified inspection before you talk to your carrier’s adjuster alone. Call (833) 423-6255 or visit the contact page to schedule one. You can also read more about Integrity CRR’s roofing work and storm restoration process or learn more about the company.
Frequently Asked Questions
Should I let my insurance company choose my roofing contractor?
You’re not required to use a contractor your insurance company recommends. You have the right to hire any licensed contractor you choose, and it’s worth choosing one whose estimators can write the repair scope in the same software the carrier uses, so any gap between the two estimates is easy to point to.
What does a Haag-certified inspector actually check for?
A Haag-certified inspector is trained to tell the difference between storm damage — hail bruising, wind-lifted shingles, impact marks — and normal wear from age or improper prior installation. That distinction is usually where a carrier pushes back on a claim, so a documented, credentialed inspection carries more weight than a verbal opinion.
What is Xactimate and why does it matter for my claim?
Xactimate is the estimating software nearly every property insurance carrier uses to price a claim. When a contractor writes the repair scope in the same platform, line items can be compared directly against the adjuster’s estimate instead of the two sides arguing in different formats. Integrity CRR’s highest-level Haag Certified Reviewer writes every claim scope in-house in Xactimate.
What happens if my insurance company’s estimate is too low?
If the approved estimate is missing justified damage, a contractor documents the gap and submits a supplement to the carrier for review — that’s standard contractor practice. Integrity CRR is not a public adjuster and doesn’t negotiate the claim on your behalf; what the policy covers stays a decision between you and your carrier, but the completeness of the scope submitted is something the contractor controls.